But keep a new razor blade handy just in case some glue gets left behind on the glass. Hopefully, the heat gun will remove all traces of your film. You might have to remove that trim to access and remove the film trapped behind the frame and glass to perform a thorough job of removing all traces of window film. Keep that in mind.Ī professional window film installer will tuck the film behind the plastic trim. Your defroster will no longer work if you cut one of those lines. Making sure you don’t slice or break the filament. You have to painstakingly remove the adhesive from the glass and the defroster lines. If it doesn’t come off in one piece, removing the residue adhesive layer is a pain to remove. The adhesive layer should not separate from the film if you use the suggested method. If you do, it’s most likely going to cause the adhesive to remain on the glass when you peel off the layer of film. If you don’t have ammonia or prefer to use soap and water, follow the same spraying and peeling method using hot water mixed with soap.Make sure you don’t start picking and tugging at the film when the glass is cold. If any parts of the window tint get stuck, use the razor to lift up the tint and continue peeling. Slowly peel it off until the window tint is removed. Remove the garbage bags and use a razor to peel up the corner of the window tint.Wait for 1-2 hours while the ammonia soaks in and loosens the window tint’s adhesive.If the garbage bags will not stick to the window, use tape to help them stay up. Spray ammonia on the inside of the car windows until each window is completely covered and place the garbage bags on top.Apply each of the garbage bags to the outside of each of the windows. Spray soap and water on the outside of each window to help the garbage bags stick. Cut black garbage bags to fit the size of the insides and outsides of your car windows.Protect your car’s interior from the ammonia by taping tarps, plastic sheets, or even garbage bags to your interior doors and window frame.Here’s how to remove window tint on a budget. There are several different inexpensive methods to easily remove window tint by yourself.Īpplying heat to melt the adhesive or peeling the tint off with ammonia or soapy water are all easy and effective ways to remove even professional car window tint. Methods for Removing Window Tint Yourself Not only will the tint begin to change color, but it may lose its ability to protect the car from the sun, and it is a good idea to replace your old window tint with a newer one. It’s a good idea to assess why and when you may want to remove your window tint for both aesthetic and practical purposes.Ĭar window tint film will start to bubble over time because the sun hits the adhesive that is applied to the window.Īs the sun strikes the window tint, the heat breaks down the adhesive, and it becomes less sticky, detaching itself from the window and causing air bubbles.īoth silver tint for cars and green tinted car windows will begin to discolor over time as well, also due to the sun’s UV rays. There are several reasons you may want to remove your window tint, whether you simply want to replace it or remove it altogether.
0 Comments
Leave a Reply. |